This series is written by a representative of the latter group, which is comprised mostly of what might be called "productivity users" (perhaps "tinkerly productivity users?"). Though my lack of training precludes me from writing code or improving anyone else's, I can, nonetheless, try and figure out creative ways of utilizing open source programs. And again, because of my lack of expertise, though I may be capable of deploying open source programs in creative ways, my modest technical acumen hinders me from utilizing those programs in what may be the most optimal ways. The open-source character, then, of this series, consists in my presentation to the community of open source users and programmers of my own crude and halting attempts at accomplishing computing tasks, in the hope that those who are more knowledgeable than me can offer advice, alternatives, and corrections. The desired end result is the discovery, through a communal process, of optimal and/or alternate ways of accomplishing the sorts of tasks that I and other open source productivity users need to perform.
Showing posts with label macintosh. Show all posts
Showing posts with label macintosh. Show all posts

Wednesday, March 7, 2012

Fifth installment: "fun" with xmodmap

In case it's not evident I'll point out at the outset that this entry is facetiously entitled (as the scare quotes might indicate). What I did with xmodmap wasn't exactly fun. Maybe mildly rewarding, finally. But also a bit perturbing.

Why perturbing? Because, after finally discovering a means of accomplishing the goal at which I was aiming, I bumped into what appears to be a long-standing bug that thwarts the resolution about half of the time. I'm still looking for a better resolution but, at least for the time being, I have a mostly workable solution.

Anyway, back to describing the task at hand, which I record here in case it may benefit anyone else and so that the lesson might stick with me longer.

So, I needed to help someone get all needed keys working on a keyboard that would, for the most part, be used for creating non-latin content. For what it's worth, the user will be switching back and forth between English and the non-latin language occasionally.

The target machine has XFCE4 installed as graphical environment. And it happens to be a "new-world Mac" that runs Linux--Debian, to be precise--a factoid which may prove fodder for a future entry. And yes, it's the powerpc architecture, and yes, it has a Mac keyboard (but not a Mac mouse).

XFCE4 has facilities for keyboard switching, which I hoped would make my job a little easier. Its graphical utilities did allow for selection of the needed encoding and layout, so I got a good part of the way using that. The user brought along stickers for the keyboard's keys which could be placed on the appropriate latin-lettered keys so that, being a non-touch-typist, it would be clear which letters should be typed in.

Almost all the letter keys all worked fine under the initial configuration. The problem was that the numerical keys across the top of the keyboard, when shifted, were supposed to be printing certain signs, and the stickers and the actual signs were not matching up. Something like 8 keys were affected. That needed to be fixed.

On looking into what could be done about this state of affairs, xmodmap began to look like it could provide an appropriate solution. So, I dove in. I did get it to work for the most part, though it seems XFCE4 cannot play nicely with xmodmap, so I had to introduce a kludge to be used on certain occasions (see here and here for some dated descriptions of the issues).

It was a bit mind-numbing trying to figure out exactly how to deploy xmodmap, given that I'd never used it before and that I was trying to make it handle two different encodings. The command xmodmap -pke >.Xmodmap-pke proved very helpful, since it created a text file of the current keyboard mapping.

Looking over that output I was able to identify the target keys. Some further reading and experimentation enabled me to find the right syntax to be used for modifying the current mapping.

It seems the canonical way of causing xmodmap to modify the current keyboard mapping is to create a file named .Xmodmap in the user's home directory. The window manager or graphical environment is supposed to read that file on starting and modify the mapping that will be used for those keys within the graphical environment.

For information on how the entries in that file should look, you should, of course, consult the man page--which, in this case, actually contains examples (many man pages, for reasons I as non-programmer can neither fathom nor appreciate, do not).

I did, of course, find helpful information in my web searches as well. The initial red herrings that needed to be sifted out were related to the fact that virtually all pages I found dealing with the matter of re-mapping macintosh keyboards were focused on re-mapping system keys like control, alt, or the "Apple key." I did not find any information dealing with the specific issue I was researching, namely, on re-mapping number keys.

But, as I observed, using xmodmap -pke gave me the data that, once I'd figured out the relevant portions, enabled me to do the required mapping. I needed, for example, the 3 key, when shifted in the non-latin mapping, to produce not the hash or number sign (i.e., #), but something that looks like the following: №. That, as I discovered, is called the numerosign.

Likewise the 7 key, when shifted in the non-latin mapping, needed to produce the question mark. The question-mark/slash key, on the other hand, needed to produce a period and a comma in the non-latin mapping, the latter when shifted.

The output of xmodmap -pke indicated that the 3 key corresponded to what to xmodmap is keycode 12 (xmodmap uses the terms keycodes and keysims to designate the various keys found on the keyboard but I do not claim to understand what is the technical difference between those terms/concepts). The Xmodmap-pke file I had created showed the following line for keycode 12:

12 0x0033 (3) 0x0023 (numbersign) 0x0033 (3) 0x0023 (numbersign)

From looking at other entries in Xmodmap-pke I was able to discern that the second half of the various lines which make up that list referred to the non-latin mappings for this keyboard, while the first half referred to the default, latin, mapping. So 0x0033 (3) 0x0023 (numbersign) is the output the key generates when the latin mapping is in effect, 3 being output when the keyboard is unshifted, and the hash sign being output when it's shifted.

The second half of the line is where my problem lay, then. In its present configuration, the keyboard was mapped to output the same 3 and hash character in the non-latin mapping as it was configured to output in the latin one. So I set about changing that.

I found some helpful samples for testing this at http://mac.linux.be/content/tuning-ubuntu-macintosh-key-mapping-and-3-mouse-button-emulation-0 . Specifically, I discovered that keyboard mapping can be changed sort of on-the-fly from the command line by issuing a command like xmodmap -e “keycode 12 = 3 numbersign 3 numerosign”. Once I did that, the 3 key, when shifted under the non-latin mapping, did, in fact, cause the desired № to appear.

That provides a good way to test the re-mapping to make sure it's working as desired. But if you want the change to be permanent, as I did, you have to construct an .Xmodmap file in your home directory that has all the relevant re-mapping lines in it and which should be read and processed each time the graphical environment starts. Entries in the .Xmodmap,file, by the way, look as follows: keycode 12 = 3 numbersign 3 numerosign. My .Xmodmap file consists in 8 such lines.

Once I had all relevant entries in that file I expected that the mapping modifications would be set and working once the graphical environment had fully loaded. In practice, however, I found that only some of the time was that the case: in many instances I had to open a terminal and type xmodmap .Xmodmap for the re-mapping to go into effect. Further internet searching revealed to me that there is some sort of incompatibility between xmodmap and XFCE4 that causes them to not work together very well. So I created a graphical shortcut that would run xmodmap .Xmodmap when the user clicked on it so as to get the desired mapping to take effect. Not a very pretty solution, but one that works for the time being.

There may be other solutions to this re-mapping issue. The xmodmap solution is one of the first I came across and pursued, so I can't speak to any of the other possible solutions. If you know of some other, possibly more effective one, I'd appreciate hearing about it.

NOTES TO SELF: setxkbmap provides some interesting key re-mapping options as well, a list of which can be found in /usr/share/X11/xkb/rules/base.lst. Another possibility I ran across suggests editing the relevant mapping file in /usr/share/X11/xkb/symbols/, but those files make little sense to me and I'm hesitant to go fiddling with them.